WAVE to PLAY Interactive Solution

About

This NON-TOUCH Interactive digital signage solution was re-designed with efforts in mind to help the healthcare industry provide for the influx of patients. With the pandemic in full flux, the WAVE to Play solution has the ability to create an interactive sign or display area without anyone having to touch anything. It’s not hard to imagine that harmful germs or not; it’s the “wave” of the future for industries nationwide. WAVE to Play is not just ideal in healthcare, but also beneficial in any industry that is looking to create a NON-TOUCH interactive display.

Wave to Play allows an “attract screen” to seamlessly auto loop while allowing additional content to be triggered with a hand wave motion across a designated area, counter or display.

WAVE may be installed underneath any non-metal material up to 3 inches thick. Our WAVE solution can be used with our VP71XD, VP71XD 4K, VP72, VP90 and VP92 industrial digital media players. The WAVE to Play solution can be used with a single sensor or connected to multiple sensors. This full solution works right out of the box and you will be up and running in 5 minutes!

Specs

Solution Examples & Scenarios 

• Healthcare: Ideal in Hospitals, Healthcare Lobbies, Pediatric Wards, Maternity Wards, Urgent care, ER, Cancer Treatment Wards, and other healthcare facilities where you wish to create an interactive educational display to keep away surface germs

• Museums: Install a wave sensor behind a Formica display case. Silkscreen or use a vinyl sticker to identify where the guest should wave their hand to learn more. Once the guest waves their hand in front of the sensor the associated video will play. Multiple sensors can be used with the same exhibit and screen. Example: Mount 3 wave sensors behind the display case and label each with a sticker... “Wave to learn about Woodpeckers, Hummingbirds, and Blue Jays”. A guest can wave over one selection and then wave over the next to trigger a different video. Once the triggered video ends the looping “attract” screen will loop again.

• Trampoline/Jump Parks: Install a wave sensor behind the wall, below the screen that plays the “safety warnings”. When a new group of children enters the room they are asked to wave their hand over the sensor to trigger the safety video to play.

• Retail: In an area where multiple products are lined up, a WAVE sensor can be mounted behind the display under each product. “Learn more” can be printed or etched on the front of the display allowing a customer to wave their hand in front of the sensor to play corresponding content

Specifications

• 2 I/O jacks for connecting to the player and additional sensors
• Maximum cable length from the player or additional sensors - 25’
• Approved materials to be used between WAVE sensor and hand:
• Wood
• Plastic
• Glass
• Fabric
• Laminate
• Drywall
• Carpet
• Sensor Range Setting: 1” to 3”
• Case Dimension: 3.5” / 89mm (L) x 2.25” / 57mm (W) x 1”/ 25mm (H)
• Mounting : (2) 3/16” mounting holes
• Warranty: 2 Years

In The Box

• 1 - Wave To Play
• 1 - Owners Manual
• 2 - Mounting Screws
• 1 - 6’ Control/Link Cable
• 1 - 2’ Control/Link Cable
• 1 - 6’ Power/Trigger Cable (For Using Wave To Play as a Dry Contact Switch)

Downloads

WAVE to Play Spec Sheet

Videos